ITEM |
MV-1220 |
Table |
Dimensions |
1500 × 650 (59.0 × 25.6) |
Working area |
1220 × 680 (48.0 × 26.8) |
T-slot |
CD150 × 18 × 4 (CD5.9 × 0.7 × 4) |
Max. loading capacity |
1200 kg ( 2640 lbs ) |
Travel Range |
Max. travel range of X/Y/Z-axis |
1220 / 680 / 680 (48.0x 26.8 × 26.8) |
Distance from spindle nose to table surface |
150-830 (5.9-32.7) |
Distance from spindle center to column |
760 (29.9) |
Spindle |
Spindle taper |
ISO No.40 |
Spindle nose outer diameter |
Ø 70 ( Ø 2.8) |
Spindle speed |
STD: 8000 rpm; OPT: 6000, 10000 rpm |
Feedrate |
Feedrate of × /Y/Z-axis |
1 -6000 mm /min (0.04-236.2 ipm) |
Slideways of × /Y/Z-axis |
Linear guideway |
Rapid traverse of × /Y/Z-axis |
30 m /min (1181 ipm) |
Tool Magazine |
Tool capacity |
24 pcs; OPT: 30 pcs |
Tool selection |
Bi-direction & the shortest selection |
Max. adjacent tool diameter × length |
Ø 80 × 250 ( Ø 3.15 × 9.8) |
Max. tool weight |
6 kg (13.2 lbs) |
Tool shank |
BT40 or V40CT or V40 ANSI |
Drive Motor |
Spindle drive motor |
11/15 kW (15/20 HP);
OPT: 15/18.5 kW (20/25 HP) |
Servo motors of × /Y/Z-axis |
4 kW (5.4 HP ) |
Coolant motor |
960 W (1.3 HP) |
Chip conveyor motor |
215 W ( 1/4 HP) |
Miscellaneous |
Power requirement |
208-220V / 75 Amps/ 3 Phase |
Floor area (W × D × H) |
3380 × 2603 × 2670 (133 × 102.5 × 105) |
Packing dimension (W × D × H) |
4380 × 2700 × 3010 (172 × 106 × 118) |
Net weight (approx.) |
9910 kgs (21802 lbs) |
Gross weight (approx.) |
11110 kgs (24442 lbs) |
