ITEM |
MV-1060 |
Table |
Dimensions |
1180 × 560 (46.5 × 22.0) |
Working area |
1060 × 620 (41.7 × 24.4) |
T-slot |
CD125 × 18 × 4 (CD4.9 × 0.7 × 4) |
Max. loading capacity |
1000 kg ( 2200 lbs ) |
Travel Range |
Max. travel range of X/Y/Z-axis |
1060 / 620 / 620 (41.7 × 24.4 × 24.4) |
Distance from spindle nose to table surface |
150-770 (5.9-30.3) |
Distance from spindle center to column |
680 (26.8) |
Spindle |
Spindle taper |
ISO No.40 |
Spindle nose outer diameter |
Ø 70 ( Ø 2.76) |
Spindle speed |
STD: 10,000 rpm; OPT: 6,000; 12,000 rpm |
Feedrate |
Feedrate of X /Y/Z-axis |
1 -6000 mm /min (0.04-236.2 ipm) |
Slideways of X /Y/Z-axis |
Linear guideway |
Rapid traverse of X /Y/Z-axis |
α Type: 30 m/min (1181 ipm)
β Type: 20 m/min (787 ipm) |
Tool Magazine |
Tool capacity |
STD: 24 pcs; OPT: 30 pcs |
Tool selection |
Bi-direction & the shortest selection |
Max. adjacent tool diameter × length |
Ø 80 × 250 ( Ø 3.15 × 9.84) |
Max. tool weight |
6 kg (13.2 lbs) |
Tool shank |
BT40 or V40CT or V40 ANSI |
Drive Motor |
Spindle drive motor |
STD: 11/15 kW (15/20 HP)
OPT: 15/18.5 kW (20/25 HP) |
Servo motors of X /Y/Z-axis |
α motor: 3.0 kW (4 HP)
β motor: 2.5 Kw (3.4 HP) |
Coolant motor |
960 W (1.2 HP) |
Chip conveyor motor |
215 W (1/ 4 HP) |
Accuracy |
Positioning |
± 0.005 |
Repeatability |
0.003 |
Miscellaneous |
Power requirement |
208-220V / 75 Amps / 3 Phase |
Floor area (W × D × H) |
2810 × 2603 × 2635 (110.6 × 102.5 × 103.7) |
Packing dimension (W × D × H) |
3010 × 2310 × 2550 (118.5 × 90.9 × 100.4) |
Net weight (approx.) |
6130 kgs (13486 lbs) |
Gross weight (approx.) |
6980 kgs (15356 lbs) |
