ITEM |
SMT-500 |
Table |
Dimensions |
500 × 300 (19.6 × 11.8) |
T – slot ( W × No. ) |
12 × 3 (0.47 × 3) |
Max. loading capacity |
100 kg (220 lbs) |
Travel Range |
Max. travel range X/Y/Z-axis |
420 / 320 / 228 (16.5 / 12.6 / 8.9) |
Distance from spindle nose to table surface |
100 ~ 328 (3.9~12.9) |
Slide ways of × /Y/Z-axis |
Linear guideways |
Rapid traverse rate of × /Y/Z-axis |
30 / 30 / 30 m /min (1181 / 1181 / 1181 ipm) |
Spindle |
Spindle taper |
ISO No.30 |
Spindle speed |
8000 rpm |
Tool Magazine |
Tool capacity |
12 pcs |
Tool selection |
Bi-directional & the shortest selection |
Max. adjacent tool diameter × length |
Ø 75 × 200 (Ø 3 × 7.8) |
Max. tool weight |
3 kg (6.6 lb) |
Tool shank type |
BT30 or CT V30 or ANSI V30 |
Drive Motor |
Spindle drive motor (cont./30 min. rated) |
2.2/3.7 kW (2.9/5 HP) |
Servo motor of × /Y/Z-axis |
0.5 / 0.5 / 0.9 kW (0.67 / 0.67 / 1.2 HP) |
Miscellaneous |
Floor area (W × D × H) |
1100 × 2184 × 2330 (43.3 × 85.9 × 91.7) |
Gross weight (approx.) |
1600 kg (3520 lbs) |
Net weight (approx.) |
1440 kg (3168 lbs) |
