ITEM |
SL-200 |
Work Capacity |
Swing over bed |
Ø 480 (Ø 18.9) |
Swing over side |
Ø 321 (Ø 12.6) |
Max. machining diameter × length |
Ø 210 × 508 (Ø 7.9 × 20) |
Machine Body |
Slant angle of bed |
45 ° |
Max. travel range of Z/X-axis |
520 / 176 (20.5 / 6.9) |
Servo motor of Z/X-axis |
1.8 / 1.8 kW |
Rapid traverse rate of Z/X-axis |
30 / 30 m /min (1181 / 1181 ipm) |
Spindle |
Diameter of spindle front bearing bore |
Ø 100 (Ø 3.9) |
Diameter of spindle bore/Draw bar bore |
Ø 62 / Ø 51 (Ø2.4 / Ø2) |
Spindle nose type |
ASA A2-6 |
Taper of spindle bore |
1/20 |
Spindle motor |
11/15 kW (14.7 / 20 HP) |
Spindle speed |
STD: 4500 rpm |
Diameter of chuck |
STD: 8” hydraulic |
Tools Turret |
Type |
Vertical |
Tool capacity |
10 pcs |
Tool shank post |
25 × 25 (1 × 1) |
Boring diameter post |
Ø 40 / 5 pcs (Ø1 1/4/ 5 pcs) |
| Radial tool post |
- |
| Axial tool post |
- |
| Dual tool post |
- |
Hydraulic Tailstock |
Quill diameter |
Ø 65 (Ø2.56) |
Tailstock travel |
425 (16.7) |
Center type |
Live |
Quill taper |
MT No. 4 |
Quill stroke |
50 (1.79) |
Drive Motor |
Coolant motor |
960 W |
Hydraulic motor |
745 W (1 HP) |
Chip conveyor motor |
215 W (1/4HP) |
| Accuracy |
Positioning (z/x) |
±0.005 |
| Repeatability (z/x) |
±0.002 |
Miscellaneous |
Power requirement |
208-220 Volts / 15 KVA / 50 Amps |
Height from floor to spindle center |
900 (35.4) |
| Height from bed to spindle center |
290 (11.4) |
Floor area (W × D × H) |
2778 × 2230 × 1690 (109 × 88 × 67) |
Packing Dimension (W × D × H) |
2930 × 2270 × 1740 (115 × 89 × 69) |
Net weight (ind. chip conveyor) |
2900 kg (6380 Ibs) |
Gross weight (incl. chip conveyor) |
3120 kg (6864 Ibs) |
